Adjusting Hunter Rotator sprinkler heads is a straightforward process. Here are the steps to follow:
First, locate the adjustment tool that came with your sprinkler head. If you don't have one, you can purchase one from a home improvement store or online.
With the water turned off, insert the adjustment tool into the adjustment socket on top of the sprinkler head. Rotate the tool until it clicks into place.
Turn on the water and observe the sprinkler head's spray pattern. If it's spraying too far or not far enough, use the adjustment tool to adjust the distance control screw located on the side of the sprinkler head.
If you need to adjust the pattern, rotate the arc adjustment screw located on the top of the sprinkler head. This will change the angle of the spray pattern.
Continue making adjustments until you're satisfied with the spray pattern and distance.
Once you're finished making adjustments, turn off the water and remove the adjustment tool.
To ensure the sprinkler head is functioning properly, run a test cycle and observe the spray pattern.
That's it! With a little bit of patience and practice, you should be able to adjust your Hunter Rotator sprinkler heads to achieve optimal coverage for your lawn or garden.
0 Commentaires